Will it fit my particular stack of patio chairs?

Yes, because we make it to your stack, not to a chair count printed on the packaging. In the instant quote tool, choose Chair Stack Armless or Chair Stack With Arms. Measure your stack using that shape's measuring guide , and the price updates as each size goes in. Order there and then, or request a free design and go over the details with us before you buy. Whichever you choose, we review the order before cutting, and check with you on any size that looks wrong.

Do I measure one chair or the whole stack?

The whole stack, standing the way you will leave it. The seats climb in steps at the front and the backrests drop in steps at the rear, so the guide asks for one height at the front and one at the back, on top of the stack's full width, depth and height.

How many chairs will it cover?

As many as you stack. Build the stack you want covered and measure it. Whatever height that stack reaches, the cover reaches too. Three chairs and nine chairs are simply two different covers.

My chairs have arms. Which shape do I pick?

Chair Stack With Arms. The armrests stand out in front of the seats and climb with the stack, so they set the front of the cover. Chairs without arms take Chair Stack Armless.

My patio chairs aren't stacked. Which cover do I need?

One cover per chair. Have a look at our outdoor chair covers .

Will it stay on in bad weather?

The standard tie-down is a drawstring hem. Pull it tight and it closes under the bottom chair's feet. If the stack stands somewhere exposed, pick a stronger tie-down : elasticated corners, eyelets for tying to something fixed, or snap buckles round the chair legs.

Won't the chairs get moldy under a cover?

Much less than a plastic sheet would. Vents high on the cover release damp air, so even the seats deep in the stack can dry. Stacking the chairs dry before you cover them helps, because a wet stack takes longer to clear under any cover. More on condensation and airflow .

Are your stackable chair covers waterproof?

Yes, seams included. Every seam has HydroLok® seam sealing. We stitch each one, then seal it from inside, and rain has no route along the thread. The lighter option is NylonSafe®, built from 380gsm 420D nylon for home and light commercial use. The heavier option is PVCArmour®, built from 550gsm 1000D PVC for exposed sites and commercial use. See the fabrics side by side .

We have a whole patio of stacks. Can you cover them all?

Yes. Every stack gets its own cover, so mixed heights and mixed chairs are fine. For more than a few, contact us with the measurements of each stack and we will quote them together.

My stack doesn't match either shape. Is that a problem?

Usually not. Contact us with a couple of photos of the stack, and we'll come back with the measurements we need.

How soon will my cover arrive?

Making starts when you approve your design. Current lead time is 2–3 weeks. The clock starts at your approval. How long the design stage takes is up to you.

What warranty does the cover come with?

That depends on the fabric: 3 years on NylonSafe® and 5 years on PVCArmour®. Add the KuvrPlus warranty extension and those become 5 and 10 years. Read the small print on our warranty page .

Stackable Chair Covers | Made to Fit Your Patio Chair Stack

Name: Custom Stackable Chair Covers
Brand: Kuvr
SKU: 56401824285057
Availability: InStock

Made to your chair stack's own measurements. Patio chairs with arms or without, two high or ten — waterproof, vented, and snug over every step.

Configure yours below for an instant quote, or scroll down to learn more.

Your price

$84.07; $84.07
Unit price: per

See exactly what we'll make before anything is cut or sewn
Unlimited design tweaks — zero risk of "close enough"
First-time fit guarantee

Made to order. Worldwide delivery in 2–3 weeks. Learn more

Free design

Not quite ready to order?

Free no-obligation design sent within 24 hours
Scaled design based on your measurements
Configure your cover above and press the button below

Two charcoal stackable chair covers on two stacks of patio chairs, each made to its own stack

What This Is

A custom stackable chair cover is a single waterproof cover over a whole stack of patio chairs, made to fit that particular stack.

Stacking is how most patio chairs get put away: one tower on the deck instead of six chairs spread across it. Restaurants, bars and hotels do the same with their outdoor seating at closing time. One cover over the tower does the work of six.

An unbranded universal stackable chair cover too short for a tall stack of patio chairs, the legs of the bottom chairs left bare and wet

Why Does a Universal Stackable Chair Cover Never Fit?

Because a universal cover is a box, and a stack of chairs is a staircase.

Each chair sits a little higher and a little further forward than the one under it. The seats climb in steps at the front. The backrests drop away in steps at the rear.

Universal covers come in one fixed size, such as 28 x 34 x 52 inches, or by a chair count: fits four to six. Neither knows what your chairs look like. Six slim bistro chairs and six chunky resin armchairs make two very different stacks.

So the box is right in one place and wrong everywhere else. It sits tight over the top backrest and hangs in loose folds over every step below. Water gathers in those folds, and the hem rides up off the feet.

Which is how a cover sold for six chairs ends up stopping short at the fourth.

What Does a Stackable Chair Cover Protect Against?

A stack of patio chairs left bare takes the weather in places a single chair never would.

Rain in the Top Seat

The seat of the top chair is a shallow dish. Rain pools in it, spills over the front and soaks the seat below.

Damp Between the Seats

Water trapped between nested seats has no air to dry it. Black mold spots spread over seats nobody sees again before spring.

Sun on the Top Chair

UV hits the top chair and the row of backrests hardest. Plastic chalks, colors fade unevenly and resin turns brittle.

Green on the Backs

Tucked in a shady corner, the rear backrests turn green with algae, and white chairs show it first.

Birds Overhead

Droppings land on the top seat, which is the first one anyone sits on when the chairs come back out.

Leaves in the Stack

Leaves and grit fall between the nested chairs and keep every seat in the pile wet.

Line drawing of four armless patio chairs stacked, the shape used for an armless stackable chair cover

Which Chair Stack Do You Have?

Two shapes, because arms change the front of a stack. Choose the one that matches your chairs and measure the stack just as it stands.

Chair Stack Armless

For side chairs, bistro chairs and armless resin chairs. The seat edges form the front of the stack, so the front height is taken to the top seat and the rear height to the lowest backrest.

Chair Stack With Arms

For dining armchairs, captain's chairs and resin chairs with arms. The armrests sit proud of the seats and climb with the stack. They set the front of the cover, so the guide measures up to the top armrest instead of the top seat.

What Happens to an Uncovered Stack of Patio Chairs?

Six marks a season outside leaves on chairs that were stacked with nothing over them.

Rainwater pooled in the seat of the top chair of an uncovered stack, the damage stackable chair covers prevent

Standing Water

Black Mold

A sun-faded, chalky top chair on an uncovered stack beside the brighter chair below it, the damage stackable lawn chair covers prevent

Chalky, Faded Plastic

Green Algae

Rust spots where the steel frames of stacked bistro chairs rub together, the damage stack chair covers prevent

Rust at the Contact Points

Bird Droppings

Close detail of an outdoor stackable chair cover's drawstring hem pulled in round the feet of the bottom chair of a stack

How Is This Stackable Chair Cover Different?

01

Follows Every Step

Your stack decides the shape: the climb of the seats at the front and the drop of the backrests behind. Eight measurements in the guide record both, and those eight become your cover. No fabric gets cut before you have signed off the design. See how the design service works.
02

Sealed Where the Panels Meet

Rain has no way in at the seams. Every seam gets HydroLok® seam sealing: stitched, then sealed on the inside. The fabric is just as waterproof. NylonSafe® is a premium waterproof fabric for home and light commercial use. PVCArmour® is heavy-duty, for exposed sites and commercial use. Compare the two fabrics.
03

Gripped at the Feet

The standard tie-down is a drawstring hem. Cinched under the bottom chair's feet, it holds the cover against the stack instead of perching on top. For a stack in an exposed corner, pick a stronger tie-down: elasticated corners at the four feet, eyelets to tie through, or snap buckles clipped around the legs.
04

Dries Out, Lifts Off

UV-stabilised fabric shrugs off a whole season of sun on the top of the stack. Vents near the top breathe out damp air, giving the seats inside a chance to dry. EZ handles, grab handles built into the vent structure, let you lift the whole cover clear, and it rolls into the duffel bag supplied. See all the built-in features.

When Do You Need a Custom Stackable Chair Cover?

Not every stack of chairs needs a cover made for it. Read both lists and you will know which side yours is on.

Focused on Longevity

This cover is right for you if:

Your chairs spend the off-season stacked on the patio rather than in a shed

Your last cover rode up the stack and left the bottom two chairs sitting in the wet

You stack chairs with arms, or more than six high, and nothing sold by chair count reaches the ground

Focused on Immediacy

You don't need this if:

Your chairs fold flat and hang on a hook in the garage until the first sunny weekend

The stack only sits there for two days while the deck gets power-washed

Any plastic tarp will do as long as something is over the chairs by tonight

Tip — please supply photos: For the best possible fit, we recommend including photos of the item to be covered — it helps us understand your project from the outset. You'll be prompted to upload images when you configure the product above.

Fabrics & Tie-Downs

Fabrics

Learn why our fabrics outperform standard covers for durability and waterproofness.

Tie-Downs & Fasteners

Superior fastenings designs to keep your cover in place through stormy conditions.

What's included?

Built-In Features

Learn what makes Kuvr.co Covers unique to the market.

Free Design Service

Enter your measurements and request your free design. No catch, no obligation.

Our Promise To You

First Time Fit Guarantee

Your cover will fit first time or we'll remake it free of charge.

Warranty

Long-term cover protection with clear, defined terms.

Further Information

Cost Over Time

Why Buy Once Beats Buying Three Times

A cheap cover isn't a cheap decision. It's a cheap decision made every two years — until the chairs underneath it aren't worth saving.

See the full cost breakdown

Will it fit my particular stack of patio chairs?: Yes, because we make it to your stack, not to a chair count printed on the packaging. In the instant quote tool, choose Chair Stack Armless or Chair Stack With Arms. Measure your stack using that shape's measuring guide, and the price updates as each size goes in. Order there and then, or request a free design and go over the details with us before you buy. Whichever you choose, we review the order before cutting, and check with you on any size that looks wrong.
Do I measure one chair or the whole stack?: The whole stack, standing the way you will leave it. The seats climb in steps at the front and the backrests drop in steps at the rear, so the guide asks for one height at the front and one at the back, on top of the stack's full width, depth and height.
How many chairs will it cover?: As many as you stack. Build the stack you want covered and measure it. Whatever height that stack reaches, the cover reaches too. Three chairs and nine chairs are simply two different covers.
My chairs have arms. Which shape do I pick?: Chair Stack With Arms. The armrests stand out in front of the seats and climb with the stack, so they set the front of the cover. Chairs without arms take Chair Stack Armless.
My patio chairs aren't stacked. Which cover do I need?: One cover per chair. Have a look at our outdoor chair covers.
Will it stay on in bad weather?: The standard tie-down is a drawstring hem. Pull it tight and it closes under the bottom chair's feet. If the stack stands somewhere exposed, pick a stronger tie-down: elasticated corners, eyelets for tying to something fixed, or snap buckles round the chair legs.
Won't the chairs get moldy under a cover?: Much less than a plastic sheet would. Vents high on the cover release damp air, so even the seats deep in the stack can dry. Stacking the chairs dry before you cover them helps, because a wet stack takes longer to clear under any cover. More on condensation and airflow.
Are your stackable chair covers waterproof?: Yes, seams included. Every seam has HydroLok® seam sealing. We stitch each one, then seal it from inside, and rain has no route along the thread. The lighter option is NylonSafe®, built from 380gsm 420D nylon for home and light commercial use. The heavier option is PVCArmour®, built from 550gsm 1000D PVC for exposed sites and commercial use. See the fabrics side by side.
We have a whole patio of stacks. Can you cover them all?: Yes. Every stack gets its own cover, so mixed heights and mixed chairs are fine. For more than a few, contact us with the measurements of each stack and we will quote them together.
My stack doesn't match either shape. Is that a problem?: Usually not. Contact us with a couple of photos of the stack, and we'll come back with the measurements we need.
How soon will my cover arrive?: Making starts when you approve your design. Current lead time is 2–3 weeks. The clock starts at your approval. How long the design stage takes is up to you.
What warranty does the cover come with?: That depends on the fabric: 3 years on NylonSafe® and 5 years on PVCArmour®. Add the KuvrPlus warranty extension and those become 5 and 10 years. Read the small print on our warranty page.

Need more in-depth help? Our full knowledge base has detailed guides, tutorials and further FAQs. Open knowledge base →

Customer Reviews

Overall rating: 5 / 5 from 461 reviews.

Customer photo review of Custom Outdoor Sofa Covers

Excellent cover. Top quality and it fits perfectly. We needed some help to ensure we got the measurements right and Kurv customer services were able to provide all the support we needed. The cover arrived much quicker than we anticipated. Its a great design, the rain water doesnt pool. It looks nice and durable and im sure it will last a lifetime of British weather. Most impressed ! Thank you

Sharon S. 5/5 Verified October 15, 2026

Custom Outdoor Sofa Covers

Customer video review of Custom Tarpaulin Made To Measure

The ordering process was simple . Arrived promptly and in a great bag for when it’s not in use , which was a nice surprise. It’s strong and sturdy, will hopefully fight off the strong winds come winter. Overall a good experience and would recommend.

Philip S. 5/5 Verified October 14, 2026

Custom Tarpaulin Made To Measure

Customer video review of Garden Furniture Covers Custom Size

Great experience from start to finish. The cover is ample big enough to accommodate accessories and handles on the grill and is both massively more robust than typical covers and has multiple features - elastication, buckles and zips, to make sure it stays planted whatever the outdoor weather will throw at it. Will be buying a new Gozney oven grill later this year and will save money on their cover going for another Kuvr of this quality.

Tony P. 5/5 Verified October 13, 2026

Trending Now

Popular Products

Custom Stackable Chair Covers

Share