How do I measure my outdoor sofa for a cover?

Pick your shape first, then measure that shape. Every shape has its own guide with the letters marked on a diagram, and the download sits with the shape selector on this page. Measure with the cushions in place, because the cushions are what set the height and the depth the cover has to clear.

Do you cover a corner sofa in one piece or in sections?

One piece, over the whole sofa as it stands. Measure it in the arrangement it will spend the winter in - if you move a modular sofa around, the cover fits the layout it was drawn to and not the others.

Can you make a cover for a curved or half-moon sofa?

Yes. A curved sofa has no straight edges, so a flat panel is slack across the middle and tight round the arc no matter what size you buy. We draw the cover to the curve you actually have.

Should I leave the cushions on underneath?

You can, and most covers are measured that way. Cushions add height and depth, so measure with them where they normally sit and the cover comes back to fit over them.

Is a custom outdoor sofa cover fully waterproof?

Ours is. Both fabrics are 100% waterproof and UV-stabilised, and both use sealed seams so water cannot get through the stitch lines. Not every cover sold as waterproof is - a fabric advertised as breathable cannot also be fully waterproof, which is why ours are not breathable and we fit airflow vents instead.

Will water sit on top of the cover?

On a sofa it can, and that is the thing a fitted cover is for. The fabric spans from the top of the back down to the front edge, with the seat sitting lower and a void above it - so a loose cover has somewhere to sag, and water collects where it sags. A cover drawn to your sofa has no slack in that span.

What about the gap underneath the sofa?

That is where wind gets in. Most outdoor sofas stand on legs with open space beneath, so air comes up inside the cover from below rather than catching the edge. The hem is sized to the real footprint so there is nothing loose for it to lift.

How does the cover stay on in high wind?

A drawstring hem is what we fit as standard. For exposed sites you can choose snap buckles and elasticated corners instead when you configure the cover.

My sofa isn't one of the shapes listed. Can you still make a cover?

Yes. Any shape, any size - the ones in the configurator are the common ones, not the limit. Send photos and measurements through the free design service and we will draw it.

How long does a custom outdoor sofa cover take to arrive?

Current lead time is 2–3 weeks from design approval. Nothing is held in stock — the cover is drawn to the measurements you send for your shape. You get that drawing back to approve before anything is cut, so production starts once you are happy with it. Timescales are estimates and vary with how busy we are, so check with us before ordering if you need it by a particular date.

What warranty comes with an outdoor sofa cover?

Three years on NylonSafe® or five years on PVCArmour®, as standard. Adding the optional KuvrPlus warranty extension when you configure the cover takes those to five and ten years. KuvrPlus is our extended cover plan — it covers fabric degradation, seam failure and manufacturing defects for longer. A sofa cover comes on and off more than most, so the seams and the hem are where wear shows first. Full terms are on our warranty page .

Custom Outdoor Sofa Covers | Waterproof, Made to Measure

Made to your sofa's exact shape and measurements. Corner, curved, U-shape or straight — waterproof, vented, and cut to the sofa you actually own.

Your price

$0.00; $0.00
Unit price: per

See exactly what we'll make before anything is cut or sewn
Unlimited design tweaks — zero risk of "close enough"
First-time fit guarantee

Made to order. Worldwide delivery in 2–3 weeks. Learn more

Free design

Not quite ready to order?

Free no-obligation design sent within 24 hours
Scaled design based on your measurements
Configure your cover above and press the button below

What This Is

A custom outdoor sofa cover is a waterproof cover made to the measurements of one sofa: yours. Corner, curved, U-shape or straight — one piece, or a modular set covered as part of the wider patio furniture range. If your shape is not on the configurator, just get in touch.

Over a sofa on its own, the cover follows the back and the arms and drops to wherever you want it to stop — the legs, or the ground. Over a corner or a modular set, it has to turn every corner and still reach the ground on each run. That is why we ask which shape you have first.

Why Do Universal Outdoor Sofa Covers Never Fit Right?

Nothing about a sofa is one measurement. There is a seat height, a back height, an arm height, and on a corner set a second run at right angles to the first. A size-band cover has to clear the tallest and widest of those, so everywhere else it is oversized.

That slack gathers in one place. The fabric spans from the top of the back to the front edge, with the seat lower and a void above it. Water collects in that span, and the weight of it drags the hem up the legs.

A corner sofa makes it worse. The two runs are rarely the same length or depth, so a rectangular cover can only bunch where they meet — the lowest point, where the water already is.

What Does an Outdoor Sofa Cover Protect Against?

Six things work on a garden sofa across the year. The cushions take the worst of it, because they hold whatever lands on them.

Rain & Standing Water

Rain runs off the back of a sofa and lands on the seat. Under a loose cover it has a void to sit in, and it gets heavier every hour. A cover with no slack across that span has nowhere to hold it.

Damp & Mould

Shut a wet sofa under a cover and the damp stays with it. Cushions hold it longest, and mould follows the seams and the piping first.

Sun & Fading

Outdoor upholstery goes chalky and pale, and it does it unevenly. Lift a cushion after a summer and the strip underneath is still the colour the rest of it used to be.

Wind

Most outdoor sofas stand on legs, so wind gets up inside the cover from underneath. Once it lifts, rain and grit get in behind it. A hem sized to the real footprint gives it nothing to fill.

Frost & Winter

Damp cushions freeze solid, and the foam inside breaks down where the ice forms. Water sitting in the frame joints expands as it freezes and works them loose over a winter.

Birds & Sap

Sap and droppings land on the cushions and go into the weave, where they set. Bird mess is acidic, so on rattan or timber it marks the finish as well.

Which Shape Do You Need?

L-Shape & Corner Sofas

Two runs of seating meeting at a corner, armless or with arms, and a chaise end at either side. Measure each run, the depth of each, and the height to the ground.

Curved Sofas

A continuous arc rather than an angle — crescent, semicircle or horseshoe. Measure around the curve rather than across it, then the depth and the height.

U-Shape Sofas

Three runs of seating around an open middle. Measure each run, the gap between the two ends, and the height.

Straight Sofas

One run of seating, two seats or ten, armless or with an arm at each end. Give us the width, the depth and the height.

What Happens to an Uncovered Garden Sofa?

Soaked Cushions

Rusted Frames

Split Timber Arms

Perished Webbing

Faded Fabric

Etched Paintwork

How Is This Outdoor Sofa Cover Different?

01

Made for the Sofa You Own

You send the measurements, we draw the cover to them and send the drawing back to approve. Nothing is cut until you have signed it off — that is how our custom covers work.
02

100% Waterproof — Not Shower-Proof

NylonSafe® is a premium waterproof fabric for home and light commercial use. PVCArmour® is heavy-duty, for high-exposure sites. Both carry HydroLok® sealed seams — stitched and sealed internally so water cannot get through the seam lines. Rated for year-round exposure, not occasional rain.
03

Stays in Position

No excess fabric means nothing for the wind to fill. A drawstring hem is standard, an elasticated one is an option, and eyelets and snap buckles are there for exposed sites.
04

Built to Stay Out

Airflow vents move trapped moisture instead of shutting it in. Reinforced load points, waterproof zips, EZ handles and a duffel bag are standard.

When Do You Need a Custom Outdoor Sofa Cover?

A custom cover is not the answer for every sofa. These are the two cases.

Focused on Longevity

This cover is right for you if:

Your garden or patio sofa lives outside all year, cushions included, and you want it usable the day the weather turns

A loose cover has already filled with water on you, sagged into the seat, or come off an arm overnight

Your sofa turns a corner, curves, or is a modular set that no size band was drawn for

Focused on Immediacy

You don't need this if:

You are happy replacing a cheap cover every year or two

The sofa and its cushions come indoors, or into a garage or shed, for the winter

You need something shipped today and fit does not matter

Fabrics & Tie-Downs

Fabrics

Learn why our fabrics outperform standard covers for durability and waterproofness.

Tie-Downs & Fasteners

Superior fastenings designs to keep your cover in place through stormy conditions.

What's included?

Built-In Features

Learn what makes Kuvr.co Covers unique to the market.

Free Design Service

Enter your measurements and request your free design. No catch, no obligation.

Our Promise To You

First Time Fit Guarantee

Your cover will fit first time or we'll remake it free of charge.

Warranty

Long-term cover protection with clear, defined terms.

Further Information

Cost Over Time

Why Buy Once Beats Buying Three Times

A cheap cover isn't a cheap decision. It's a cheap decision made every two years — until the sofa underneath it isn't worth saving.

See the full cost breakdown

How do I measure my outdoor sofa for a cover?: Pick your shape first, then measure that shape. Every shape has its own guide with the letters marked on a diagram, and the download sits with the shape selector on this page. Measure with the cushions in place, because the cushions are what set the height and the depth the cover has to clear.
Do you cover a corner sofa in one piece or in sections?: One piece, over the whole sofa as it stands. Measure it in the arrangement it will spend the winter in - if you move a modular sofa around, the cover fits the layout it was drawn to and not the others.
Can you make a cover for a curved or half-moon sofa?: Yes. A curved sofa has no straight edges, so a flat panel is slack across the middle and tight round the arc no matter what size you buy. We draw the cover to the curve you actually have.
Should I leave the cushions on underneath?: You can, and most covers are measured that way. Cushions add height and depth, so measure with them where they normally sit and the cover comes back to fit over them.
Is a custom outdoor sofa cover fully waterproof?: Ours is. Both fabrics are 100% waterproof and UV-stabilised, and both use sealed seams so water cannot get through the stitch lines. Not every cover sold as waterproof is - a fabric advertised as breathable cannot also be fully waterproof, which is why ours are not breathable and we fit airflow vents instead.
Will water sit on top of the cover?: On a sofa it can, and that is the thing a fitted cover is for. The fabric spans from the top of the back down to the front edge, with the seat sitting lower and a void above it - so a loose cover has somewhere to sag, and water collects where it sags. A cover drawn to your sofa has no slack in that span.
What about the gap underneath the sofa?: That is where wind gets in. Most outdoor sofas stand on legs with open space beneath, so air comes up inside the cover from below rather than catching the edge. The hem is sized to the real footprint so there is nothing loose for it to lift.
How does the cover stay on in high wind?: A drawstring hem is what we fit as standard. For exposed sites you can choose snap buckles and elasticated corners instead when you configure the cover.
My sofa isn't one of the shapes listed. Can you still make a cover?: Yes. Any shape, any size - the ones in the configurator are the common ones, not the limit. Send photos and measurements through the free design service and we will draw it.
How long does a custom outdoor sofa cover take to arrive?: Current lead time is 2–3 weeks from design approval. Nothing is held in stock — the cover is drawn to the measurements you send for your shape. You get that drawing back to approve before anything is cut, so production starts once you are happy with it. Timescales are estimates and vary with how busy we are, so check with us before ordering if you need it by a particular date.
What warranty comes with an outdoor sofa cover?: Three years on NylonSafe® or five years on PVCArmour®, as standard. Adding the optional KuvrPlus warranty extension when you configure the cover takes those to five and ten years. KuvrPlus is our extended cover plan — it covers fabric degradation, seam failure and manufacturing defects for longer. A sofa cover comes on and off more than most, so the seams and the hem are where wear shows first. Full terms are on our warranty page.

Need more in-depth help? Our full knowledge base has detailed guides, tutorials and further FAQs. Open knowledge base →

Customer Reviews

Overall rating: 5 / 5 from 446 reviews.

Customer video review of Garden Furniture Covers Custom Size

Really pleased with our cover! We have an outside grill station that was impossible to find a ready made cover for. John was super helpful with measurements and advice and the zips were a great addition. Extremely tough material that will last for many years. Would thoroughly recommend!

Alex C. 5/5 Verified August 28, 2026

Trending Now

Popular Products

Custom Outdoor Sofa Covers

Share