How do I measure my pizza oven for a cover?

Pick your oven first — on a stand, countertop wood-fired, countertop gas, or on a brick base — then measure that shape. Each one has its own measuring guide on this page with every measurement lettered on a diagram, and a Download PDF button if you want a copy to take outside. A is the total width, B the total depth and C the total height, measured to the top of the chimney cap where there is one. The chimney shapes then ask where the chimney sits: its distance from the front and rear edges, and the width of its cap. That is what lets the cover clear it instead of tenting off it. Measure the oven cold, exactly as it stands, and do not add anything for room: we add the fitting allowance ourselves.

Which shape is my Ooni, Gozney or Ninja?

Ooni Koda, Gozney Arc and the Ninja Artisan are countertop gas ovens — a stepped body and no chimney. Ooni Karu and Fyra and the Gozney Roccbox are countertop ovens with a chimney — a portable pizza oven cover is shaped over the flue and drops back to the body. Choose countertop wood-fired for those even if you run yours on gas — it is the chimney the cover has to clear, not the fuel. A Gozney Dome, or any oven standing on its own steel stand or on a table you want covered too, is the with-stand shape. An oven set on a brick or block base is brick base. If you are not sure, send us a photo and we will tell you.

Do I have to let the oven cool down before I cover it?

Yes. A pizza oven runs far hotter than a barbecue and the shell, chimney and stone hold that heat for a long time after the fire is out. The cover is a waterproof fabric, not a fireproof one — it goes on once the oven is cold to the touch, and it comes off before you light it. Left on a warm oven it will not burn, but heat and trapped moisture are exactly what the cover is there to keep off the metal.

Will the cover go over the chimney?

If you want it to, yes — a pizza oven cover with chimney shaped in rather than tented over it. Or leave the chimney clear and the cover is cut to finish around its base; either way it is your call when you configure it. For a covered chimney we ask for the height of the chimney, the width of its cap and how far it sits from the front and back edges. The cover is shaped to clear it and drop back down to the body. A rectangular cover has to tent from the top of the cap, which leaves the body loose and the whole thing catching the wind. If your chimney cap comes off, leave it on when you measure. If you take it off to store the oven, tell us and we will make the cover for the flue without it.

Can I use a barbecue cover on a pizza oven?

You can put one on, but it will not fit. Barbecue covers are cut for a wide, low box on wheels. A pizza oven is a small body with a flue coming out of the top, so the cover has nothing to sit on but the chimney cap. It tents from there, hangs loose everywhere else, and the wind gets underneath it. Search results for pizza oven covers are full of relisted barbecue covers, which is where most poor fits come from.

Can I leave a pizza oven outside all year?

Most owners do, and that is what an outdoor pizza oven cover is for. The shell is steel or ceramic and the stone is porous, so what wears an oven out is not the cold. It is water: rain down the chimney onto the stone, damp shut inside a closed oven, and rust starting where the chimney meets the shell, and at the feet. On a brick or clay oven the same water soaks the dome, and every firing and every frost opens the cracks a little further. A fitted cover with airflow vents keeps the rain off and lets the inside dry between cooks. If you bring the oven indoors for winter, measure it as it stands outside and the same cover does both jobs.

Does the cover include the stand or table?

If you pick the with-stand shape, yes. The cover runs from the top of the chimney to the ground and takes in the stand or table the oven sits on, with a drawstring hem pulled in at the bottom. If you pick a countertop shape, the cover finishes at the base of the oven and the table underneath stays uncovered. That is the right choice if the oven lives on a kitchen counter or a table you use for other things. The Ooni Modular Table, a Gozney stand and a home-made trolley are all with-stand.

My oven runs on gas. What happens to the bottle and the hose?

The cover is made to the oven, not the bottle. On a countertop gas oven the regulator and hose come out of the back at low level and the cover drops over them. Disconnect the bottle and keep it where you keep it now. If your oven has a gas bottle housed inside its stand, choose the with-stand shape and the cover takes the stand in. Tell us in the notes that there is a bottle inside, so we allow for the door.

Is a custom pizza oven cover fully waterproof?

Yes. Both fabrics are waterproof rather than showerproof: NylonSafe® is a 420-denier nylon for home and light commercial use, PVCArmour® a heavy 1000-denier PVC for exposed sites and commercial use. Every seam is HydroLok® sealed — stitched and then sealed internally so water cannot get through the seam lines. Airflow vents are built in, so the oven dries out underneath instead of sweating. Read more about our fabrics →

How does the cover stay on in wind?

A pizza oven is heavy, so the cover does not need to hold the oven down — it needs to hold itself down. As standard the cover has a drawstring hem that pulls in under the oven's feet or the stand rail, so there is no loose skirt for the wind to get under. The chimney is shaped in rather than tented, so there is no pocket for a gust to fill. If your oven sits somewhere exposed, swap the drawstring for elasticated corners, snap buckles, eyelets or a combination when you configure the cover. See the tie-down options .

Do pizza ovens crack in winter?

Brick and clay ovens do. The dome is porous, so it holds water, and when that water freezes it expands and pushes the hairline cracks every firing leaves a little wider each year. Firing an oven while the stone is still wet does the same from the inside: the water turns to steam inside the stone, which cracks it. A cover that keeps the dome and the flue dry stops both.

My oven isn't one of the four shapes. Can you still make a cover?

Yes. The four on the configurator are the shapes we are asked for most, not a boundary — we cover any oven, any shape, any size. A twin-chimney oven, an oven on a trolley with side shelves, a barrel oven: contact us with photos and the main measurements and we will design it from those. No fabric is cut until you have approved the design.

How long does a custom pizza oven cover take to arrive?

Current lead time is 2–3 weeks from design approval. Every cover is made to your oven's measurements to order, so the clock starts when you approve the design, not when you place the order. Timescales are estimates and can vary depending on how busy we are, so please check with us before ordering.

How long does a custom pizza oven cover last?

Ten years or more is normal with a good fit and a little care. Keep it off the oven until the oven is cold, brush the ash and soot off the inside face now and then, and leave the vents clear. NylonSafe® carries a 3-year warranty and PVCArmour® 5 years; the KuvrPlus warranty extension doubles both.

What warranty comes with a custom pizza oven cover?

Every cover carries a warranty as standard, covering fabric degradation, seam failure and manufacturing defects. NylonSafe® is covered for 3 years and PVCArmour® for 5, and the KuvrPlus warranty extension doubles those to 5 and 10 years. Full terms are on our warranty page .

Custom Pizza Oven Covers | Made to Your Oven

Name: Custom Pizza Oven Covers
Brand: Kuvr
SKU: 56226823012737
Availability: InStock

A beige custom pizza oven cover fitted over a dome oven on a brick base with a log store beneath, the terracotta chimney left clear, in a walled garden

Made to your oven's own measurements, with the chimney covered or left clear as you choose. With stand, countertop wood-fired, countertop gas or brick base, every cover is designed to your numbers before it is cut.

Configure yours below for an instant quote, or scroll down to learn more.

Title : Default Title Default Title

Product variants

Your price

$83.55; $83.55
Unit price: per

See exactly what we'll make before anything is cut or sewn
Unlimited design tweaks — zero risk of "close enough"
First-time fit guarantee

Made to order. Worldwide delivery in 2–3 weeks. Learn more

Free design

Not quite ready to order?

Free no-obligation design sent within 24 hours
Scaled design based on your measurements
Configure your cover above and press the button below

A man lifting a custom pizza oven cover off a countertop pizza oven on its stand on a garden patio, the cover shaped to the oven

What This Is

A custom pizza oven cover is a waterproof cover cut to the measurements of one oven: yours. Some ovens have a chimney and some have none; if yours has one, we cover it or leave it clear, whichever you prefer. It sits in our wider range of outdoor cooking and BBQ covers.

Where the chimney sits, or whether there is one at all, changes what the cover has to do. So we ask which oven you have before anything else. The cover goes on once the oven is cold, and comes off before you light it.

A universal pizza oven cover too small for the 16-inch oven under it, the elasticated hem caught on top of the base rail and the fabric above bunched into folds

Verified Purchase

Does not fit

“This does not fit the 16” Big Horn Oven”

Read the full review

Why Do Universal Pizza Oven Covers Never Fit Right?

Standard sizes assume there's an average pizza oven. There isn't. One sits on an outdoor kitchen counter, the next is a dome on a brick plinth, and where the chimney sits changes with every model, and with every DIY build. Search Amazon for a pizza oven cover and half the results are barbecue covers relisted, sold fast and priced low enough that most people live with the shortcomings. That's the problem: whether it fits comes down to how close the guess was.

The one in the photo was bought for a 16-inch Big Horn. The elastic hem is too tight to pull down under the base, so it has stopped on top of the rail. Because it can't seat, the fabric above bunches. One dimension out, and none of the rest of it sits where it should. A size up would clear the base and be loose everywhere else.

Either way the cover doesn't hold. Wind gets under a hem that never reached and lifts it. Water sits in the folds instead of running off.

What Does a Pizza Oven Cover Protect Against?

Rain, damp, sun, wind-blown grit, frost, and nesting birds. An oven has a chimney at the top and a mouth at the front, so all six get inside it as well as onto it.

Rain Down the Chimney

An open chimney is a funnel. Rain runs down the flue onto the baking stone, and stone is porous, so it holds what it takes. Fire it before it has dried and the water turns to steam inside the stone, which is what cracks it.

Damp Shut In

A closed oven does not dry. At night the bare steel inside cools faster than the air, and the water in that air condenses onto the roof and walls. Rust follows it on the steel, and mould on the stone.

Sun & Fading

Powder coat chalks and fades on the top and on the side that faces the afternoon. Plastic knobs and the thermometer face go brittle. The band of paint the chimney cap has shaded is still the colour the oven arrived in.

Wind-Blown Grit

It is not the wind that does the damage, it is what the wind is carrying. Grit, dust and leaves blow into the open mouth and down the flue, and stay on the stone until the next cook bakes them in.

Frost

Water sitting in a porous dome and in the flue joints freezes and pushes outward. On a brick or clay oven that is what opens the hairline cracks every firing leaves, a little wider each winter.

Birds & Nests

An open oven is a dry hole in a garden, and something will move in. Birds and mice build in the mouth over winter, and a nest against the stone is fuel the first time you light it.

A corten steel pizza oven with a chimney on its own stand with a log store beneath, in a garden, the with-stand shape gozney pizza oven covers are made to

Which Pizza Oven Do You Have?

We cover four shapes: an oven on a stand, a countertop wood-fired oven, a countertop gas oven, and an oven on a brick base. The chimney and the stand decide which one is yours, not the badge on the front — that goes for Ooni, Gozney and Ninja alike. Pick the closest match and its measuring guide opens with it. If none of them looks like your oven, send photos and your measurements and we will work it out with you.

Pizza Oven With Stand

An oven on its own steel stand, a trolley or a table you want covered too. A cover for a pizza oven and stand runs from the top of the chimney to the ground, then closes in beneath the stand rail, so the shelf and the legs stay dry with the oven.

Countertop Wood-Fired Oven

A compact oven with a chimney, standing on a table or counter: Ooni Karu and Fyra, Gozney Roccbox. It is cut over the chimney and drops back onto the body, finishing at the oven's feet so the table stays free.

Countertop Gas Oven

This shape has a stepped body and no chimney: Ooni Koda, Gozney Arc, Ninja Artisan. The cover steps down with the body, from the upper section out to the wider base, and finishes at the feet with the hose exit clear at the back.

Oven on a Brick Base

A dome or barrel oven built onto a brick or block plinth. The cover takes in the oven, its chimney and the base beneath it, and runs to the ground. The wood store and the brickwork stay dry with it.

A grill with a pizza-oven attachment, such as a Ninja Woodfire or a kamado with a stone, is a grill, and is measured on our custom grill covers page.

What Happens to an Uncovered Outdoor Pizza Oven?

Left uncovered, an outdoor pizza oven rusts at the chimney collar and inside the barrel, the dome cracks, and the stone goes mouldy. A pizza oven is lit a dozen times a summer. The other three hundred days it stands out in the rain and the frost. It happens under a cover that tented off the cap, came off overnight, or shut the damp in, just as surely as it happens to an oven left bare.

Powder coat flaking and rust spreading across the top of an Ooni pizza oven around the chimney collar

Rust at the Chimney Collar

A crack running down the brick dome of an uncovered pizza oven, opened by rain soaking the mortar and frost widening it between firings

Cracked Dome

Mould spreading across the baking stone inside an uncovered gas pizza oven, the burner behind it

Mould on the Stone

Powder coat chalked grey and blotched across the top of an Ooni portable pizza oven left uncovered in the sun

Chalked Powder Coat

Rust spreading across the bare steel roof inside a gas pizza oven above the burner, where condensation collects overnight

Rust Inside the Oven

Straw and twigs from a nest laid across the floor of a brick pizza oven left uncovered with the door off

Nest in the Oven

A custom pizza oven cover fitted over a countertop wood-fired oven on its trolley in a garden, the chimney shaped in and the hem finishing at the oven base

How Is This Pizza Oven Cover Different?

01

Measured Around Your Oven

We work from your oven's width, depth and height, plus the chimney: how tall it stands, how wide the cap is, and where it sits. No fabric is cut until you have seen the design and said yes.
02

100% Waterproof — Not Shower-Proof

Water that gets past a cover does not run off an oven. It goes in at the mouth and stays. NylonSafe® is a premium waterproof fabric for home and light commercial use. PVCArmour® is heavy-duty, for exposed and commercial sites. Both carry HydroLok® sealed seams — stitched and sealed internally so water cannot get through the seam lines. Compare the two fabrics.
03

Stays Put in the Wind

The chimney is built in, so the fabric sits down on the oven with no slack over the top for the wind to lift. The hem pulls in tight under the feet or the stand rail, with elasticated corners, eyelets and snap buckles for an exposed spot.
04

Built to Stay Out

Airflow vents let a cold oven breathe the damp out rather than trapping it. EZ handles — grab handles built into the vent structure — mean it goes back on without a fight. Both fabrics are UV-stabilised. Reinforced load points, waterproof zips and a duffel bag are standard. See every built-in feature.

When Do You Need a Custom Pizza Oven Cover?

Not every pizza oven needs a custom cover. It comes down to where yours lives and how long you want to keep it. Whichever side you land on, this is how we make pizza oven covers.

Focused on Longevity

This cover is right for you if:

Your pizza oven stays outside through the winter and you want to light it in April without drying it out first

A universal cover has already failed on you — too tight to seat at the base, or gone in the first gale

It sits on a stand, a trolley or a brick base you want covered along with the oven

Focused on Immediacy

You don't need this if:

You are content replacing a cheap pizza oven cover every year or two

Yours is a countertop model that goes back indoors after every cook

You need something today and will take whatever fits

Tip — please supply photos: For the best possible fit, we recommend including photos of the item to be covered — it helps us understand your project from the outset. You'll be prompted to upload images when you configure the product above.

Fabrics & Tie-Downs

Fabrics

Learn why our fabrics outperform standard covers for durability and waterproofness.

Tie-Downs & Fasteners

Superior fastenings designs to keep your cover in place through stormy conditions.

What's included?

Built-In Features

Learn what makes Kuvr.co Covers unique to the market.

Free Design Service

Enter your measurements and request your free design. No catch, no obligation.

Our Promise To You

First Time Fit Guarantee

Your cover will fit first time or we'll remake it free of charge.

Warranty

Long-term cover protection with clear, defined terms.

Further Information

Cost Over Time

Why Buy Once Beats Buying Three Times

A cheap cover isn't a cheap decision. It's a cheap decision made every two years — until the pizza oven underneath it isn't worth saving.

See the full cost breakdown

How do I measure my pizza oven for a cover?: Pick your oven first — on a stand, countertop wood-fired, countertop gas, or on a brick base — then measure that shape. Each one has its own measuring guide on this page with every measurement lettered on a diagram, and a Download PDF button if you want a copy to take outside. A is the total width, B the total depth and C the total height, measured to the top of the chimney cap where there is one. The chimney shapes then ask where the chimney sits: its distance from the front and rear edges, and the width of its cap. That is what lets the cover clear it instead of tenting off it. Measure the oven cold, exactly as it stands, and do not add anything for room: we add the fitting allowance ourselves.
Which shape is my Ooni, Gozney or Ninja?: Ooni Koda, Gozney Arc and the Ninja Artisan are countertop gas ovens — a stepped body and no chimney. Ooni Karu and Fyra and the Gozney Roccbox are countertop ovens with a chimney — a portable pizza oven cover is shaped over the flue and drops back to the body. Choose countertop wood-fired for those even if you run yours on gas — it is the chimney the cover has to clear, not the fuel. A Gozney Dome, or any oven standing on its own steel stand or on a table you want covered too, is the with-stand shape. An oven set on a brick or block base is brick base. If you are not sure, send us a photo and we will tell you.
Do I have to let the oven cool down before I cover it?: Yes. A pizza oven runs far hotter than a barbecue and the shell, chimney and stone hold that heat for a long time after the fire is out. The cover is a waterproof fabric, not a fireproof one — it goes on once the oven is cold to the touch, and it comes off before you light it. Left on a warm oven it will not burn, but heat and trapped moisture are exactly what the cover is there to keep off the metal.
Will the cover go over the chimney?: If you want it to, yes — a pizza oven cover with chimney shaped in rather than tented over it. Or leave the chimney clear and the cover is cut to finish around its base; either way it is your call when you configure it. For a covered chimney we ask for the height of the chimney, the width of its cap and how far it sits from the front and back edges. The cover is shaped to clear it and drop back down to the body. A rectangular cover has to tent from the top of the cap, which leaves the body loose and the whole thing catching the wind. If your chimney cap comes off, leave it on when you measure. If you take it off to store the oven, tell us and we will make the cover for the flue without it.
Can I use a barbecue cover on a pizza oven?: You can put one on, but it will not fit. Barbecue covers are cut for a wide, low box on wheels. A pizza oven is a small body with a flue coming out of the top, so the cover has nothing to sit on but the chimney cap. It tents from there, hangs loose everywhere else, and the wind gets underneath it. Search results for pizza oven covers are full of relisted barbecue covers, which is where most poor fits come from.
Can I leave a pizza oven outside all year?: Most owners do, and that is what an outdoor pizza oven cover is for. The shell is steel or ceramic and the stone is porous, so what wears an oven out is not the cold. It is water: rain down the chimney onto the stone, damp shut inside a closed oven, and rust starting where the chimney meets the shell, and at the feet. On a brick or clay oven the same water soaks the dome, and every firing and every frost opens the cracks a little further. A fitted cover with airflow vents keeps the rain off and lets the inside dry between cooks. If you bring the oven indoors for winter, measure it as it stands outside and the same cover does both jobs.
Does the cover include the stand or table?: If you pick the with-stand shape, yes. The cover runs from the top of the chimney to the ground and takes in the stand or table the oven sits on, with a drawstring hem pulled in at the bottom. If you pick a countertop shape, the cover finishes at the base of the oven and the table underneath stays uncovered. That is the right choice if the oven lives on a kitchen counter or a table you use for other things. The Ooni Modular Table, a Gozney stand and a home-made trolley are all with-stand.
My oven runs on gas. What happens to the bottle and the hose?: The cover is made to the oven, not the bottle. On a countertop gas oven the regulator and hose come out of the back at low level and the cover drops over them. Disconnect the bottle and keep it where you keep it now. If your oven has a gas bottle housed inside its stand, choose the with-stand shape and the cover takes the stand in. Tell us in the notes that there is a bottle inside, so we allow for the door.
Is a custom pizza oven cover fully waterproof?: Yes. Both fabrics are waterproof rather than showerproof: NylonSafe® is a 420-denier nylon for home and light commercial use, PVCArmour® a heavy 1000-denier PVC for exposed sites and commercial use. Every seam is HydroLok® sealed — stitched and then sealed internally so water cannot get through the seam lines. Airflow vents are built in, so the oven dries out underneath instead of sweating. Read more about our fabrics →
How does the cover stay on in wind?: A pizza oven is heavy, so the cover does not need to hold the oven down — it needs to hold itself down. As standard the cover has a drawstring hem that pulls in under the oven's feet or the stand rail, so there is no loose skirt for the wind to get under. The chimney is shaped in rather than tented, so there is no pocket for a gust to fill. If your oven sits somewhere exposed, swap the drawstring for elasticated corners, snap buckles, eyelets or a combination when you configure the cover. See the tie-down options.
Do pizza ovens crack in winter?: Brick and clay ovens do. The dome is porous, so it holds water, and when that water freezes it expands and pushes the hairline cracks every firing leaves a little wider each year. Firing an oven while the stone is still wet does the same from the inside: the water turns to steam inside the stone, which cracks it. A cover that keeps the dome and the flue dry stops both.
My oven isn't one of the four shapes. Can you still make a cover?: Yes. The four on the configurator are the shapes we are asked for most, not a boundary — we cover any oven, any shape, any size. A twin-chimney oven, an oven on a trolley with side shelves, a barrel oven: contact us with photos and the main measurements and we will design it from those. No fabric is cut until you have approved the design.
How long does a custom pizza oven cover take to arrive?: Current lead time is 2–3 weeks from design approval. Every cover is made to your oven's measurements to order, so the clock starts when you approve the design, not when you place the order. Timescales are estimates and can vary depending on how busy we are, so please check with us before ordering.
How long does a custom pizza oven cover last?: Ten years or more is normal with a good fit and a little care. Keep it off the oven until the oven is cold, brush the ash and soot off the inside face now and then, and leave the vents clear. NylonSafe® carries a 3-year warranty and PVCArmour® 5 years; the KuvrPlus warranty extension doubles both.
What warranty comes with a custom pizza oven cover?: Every cover carries a warranty as standard, covering fabric degradation, seam failure and manufacturing defects. NylonSafe® is covered for 3 years and PVCArmour® for 5, and the KuvrPlus warranty extension doubles those to 5 and 10 years. Full terms are on our warranty page.

Need more in-depth help? Our full knowledge base has detailed guides, tutorials and further FAQs. Open knowledge base →

Customer Reviews

Overall rating: 5 / 5 from 450 reviews.

Customer photo review of Custom Tarpaulin Made To Measure

Hello , once I’d submitted my drawing & measurements I got a call back & proceeded with the order , delivery was a lot quicker than I was told & the communication was excellent, We are very happy with the cover & now have full protection on our gazebo & hot tub. Thank you , Les & Trish

Leslie R. 5/5 Verified September 24, 2026

Custom Tarpaulin Made To Measure

Customer photo review of Clear Kuvr Custom

We have two of the covers, one at each end of the veranda. They fitted well and I have attached them to the wall to prevent them from blowing too much in the wind. They are clear so we can still see out into the garden. Unfortunately you cannot see the far end cover as out rather overgrown Kentia palm is in the way. If anyone would like to buy it please let me know, that’s the palm!

Peter E. 5/5 Verified September 23, 2026

Clear Kuvr Custom

Customer photo review of Custom Outdoor Table Covers

Initial placement of order a problem quickly resolved by the firm. Have been needing a hot tub cap for sometime as the insulated top allowed rainwater to flow. Nothing available locally (Cyprus), found the firm via internet search. As expected shipping and customs clearance took some time with transit via France and Italy but courier was the first delivery to my house door in a small village, usually I have to collect. As for the item, at first look delighted. Robust with sealed seams and drawstring to prevent wind disturbance. Waiting patiently to confirm, as I expect, the cap is waterproof, also looks great as can be seen in the picture. Thanks. Geoff

Geoff D. 4/5 Verified September 23, 2026

Custom Outdoor Table Covers

Made to measure cover for the wall of our Bike Port. The wall is full of holes and loose stones that fall on my bike. Does the job of keeping the wind out and my bike clean and dry. Good quality thick material. Delivered quickly.

Gill T. 5/5 Verified September 23, 2026

Custom Tarpaulin Made To Measure

Customer video review of Garden Furniture Covers Custom Size

Really pleased with our cover! We have an outside grill station that was impossible to find a ready made cover for. John was super helpful with measurements and advice and the zips were a great addition. Extremely tough material that will last for many years. Would thoroughly recommend!

Alex C. 5/5 Verified August 28, 2026

Trending Now

Popular Products

Custom Pizza Oven Covers

Share