What This Is
A custom fire pit cover is a made-to-measure waterproof cover built to the exact shape of your pit — diameter or width, bowl profile, and height from base to rim. A fire pit spends most of its life outside and unlit. Weeks between uses. Whole seasons untouched. It sits open-topped in rain, frost and UV, collecting whatever the weather brings.
Round, square, rectangular, tapered, hexagonal — we cut to your pit's measurements and nothing else.
Every Kuvr fire pit cover is made to order — your pit's dimensions are the pattern, not a stock size. If you need a cover for a grill or barbecue instead, see our custom grill covers.
Why Do Standard Fire Pit Covers Never Quite Fit?
Some fire pits come from a hardware store. Others are built from stone, cast from concrete, or fabricated to a custom shape. What they share: no standard cover was made with their dimensions in mind.
Standard covers are sized by one or two measurements. A real pit is defined by more — the taper from rim to base, the height of the lip, the gas housing on a propane model. Cut to the widest point with no allowance for the taper, a cover has too much fabric at the base. It sags. It pools. Sized for a flush rim, it sits proud on a raised lip and leaves a gap underneath.
The result fits the category but not the pit. Water collects where it sags; wind finds the gaps at the base. A waterproof fire pit cover has to follow the actual dimensions of your pit, not the nominal size it was sold as.
What Does It Protect?
Which Shape Do You Need?
Which Shape Do You Need?
Round Fire Pit Covers
Most wood-burning fire pits are round, and a round cover must follow the exact outer diameter — a few centimetres of excess at the rim opens a gap at the base where wind gets under. A round fire pit cover cut to your exact diameter sits flush to the lip all the way round. Common diameters are 30, 36 and 42 inch — but yours probably isn't any of these, and that's exactly the point.
Square Fire Pit Covers
Square steel fire pits are often tapered — wider at the top than the base. A cover sized to the widest point leaves excess that pools and shifts. A square fire pit cover made to your measurements follows the actual top dimension, pulling taut at every corner. Order a standard 36-inch cover for a 34-inch pit and it shifts with every gust; order it for a 38-inch pit and it won't seat at all. The inch or two either side of 'close enough' is where standard covers fail.
Rectangular Fire Pit Covers
Fire tables — a burner in a stone, concrete or steel surround — are almost always rectangular and rarely match standard aspect ratios. Width and depth both matter, so a rectangular fire pit cover is cut to both together. A 60 x 24 table has a completely different profile to a 60 x 36 — same length, entirely different cover. A cover cut to length but not depth leaves two open sides. For a standalone fire table with its own cover, see our fire table covers.
What Happens to an Uncovered Fire Pit?
A quality outdoor fire pit cover protects against all of the above. Leave the pit uncovered and the damage starts from the first season. Here's what that looks like:
Rust & Corrosion
UV Fade
Water Pooling
Mould & Mildew
Pest Nesting
Surface Staining
How Is This Fire Pit Cover Different?
-
01
Cut to Your Fire Pit's Exact Shape
Round, square, rectangular, tapered, or hexagonal. We cut to your actual dimensions — rim diameter, bowl profile, base width. The cover follows the geometry of your specific pit, not a size category it approximately fits into.
-
02
100% Waterproof — Not Shower-Proof
NylonSafe® (a premium waterproof fabric for home and light commercial use) and PVCArmour® (a heavy-duty fabric for high-exposure environments), with HydroLok® sealed seams — stitched and sealed internally so water cannot enter through the seam lines. Rated for year-round outdoor exposure, not occasional rain.
-
03
Stays in Position
A hem cut to your pit's exact perimeter leaves no excess fabric for wind to catch. Integrated drawstrings or straps lock the cover at the base. It stays on in exposed gardens and open patios without weighting or chasing it across the terrace.
-
04
Made Once. Lasts Years.
Reinforced at every stress point. A heavy duty fire pit cover built to your exact dimensions doesn't need replacing each season. The construction handles the weight of standing water, sustained UV, and years of outdoor use without degrading.
When Do You Need a Custom Fire Pit Cover?
Not everyone needs this. Here is how to tell which side you are on.
This cover is right for you if:
Your fire pit is a permanent fixture — it lives outside through every season and you want it in good condition for years
You've had an oversized cover lift off, sag, or pool water and you want one that actually fits
Your pit is a non-standard dimension, a tapered shape, or a fire table configuration that standard cover sizes can't accommodate cleanly
You don't need this if:
You're happy replacing a cheap cover every year or two
Your fire pit is temporary or you're not invested in its long-term condition
You need something shipped today and fit doesn't matter
