Sized to the exact dimensions of your center console — standard, T-top, or pontoon.
Configure yours below for an instant quote, or scroll down to learn more.
Your price
- See exactly what we'll make before anything is cut or sewn
- Unlimited design tweaks — zero risk of "close enough"
- First-time fit guarantee
Not quite ready to order?
- Free no-obligation design sent within 24 hours
- Scaled design based on your measurements
- Configure your cover above and press the button below
What This Is
A custom center console boat cover is a made-to-measure waterproof cover built to the exact dimensions of your console — helm, instruments and all. A center console gets used hard. Salt spray. UV. Rain sitting on the helm overnight. Weeks at the marina between trips. It houses your electronics and rigging, and it sits exposed whenever the boat is docked.
Every Kuvr center console boat cover is made to order — your console's dimensions are the pattern, not a stock size. This covers the console alone. And if you keep a personal watercraft alongside it, we cut a custom jet ski cover to your exact model too.
Why Do Standard Console Covers Never Fit Right?
No two center consoles share the same footprint. The same model built in different years has different helm dimensions. Custom rigging, aftermarket electronics and extended cowlings mean even two identical hulls sit covered differently.
Standard center console boat covers are sized by approximate categories — small, medium, large. Sized for a 36-inch console on a 42-inch helm, a cover bags at the base and catches wind. Sized for a 48-inch console on a 38-inch helm, it leaves excess fabric that pools, shifts, and works its way off at the marina.
Either way, the cover is doing one of two things: too big, and the electronics get wet when rain pools in the sag; too small, and it stresses the fastening system every time the boat rocks at the dock.
The right cover follows the actual dimensions of your console, not the nearest available size.
What Does It Protect?
Which Configuration Do You Have?
Which Configuration Do You Have?
Standard Center Console
The most common setup: a freestanding console with a flat or slightly raked helm face, no overhead structure. The catch is that console dimensions vary enormously between makers and models — a 23-foot fishing boat from one builder has a completely different footprint than a 23-footer from another. Standard covers are sized to approximate categories; yours needs one sized to its actual width, depth and height.
T-Top Center Console Covers
A T-top frame changes the geometry entirely. The cover clears the T-top legs, sitting below the frame to cover the helm and console face — it doesn't try to cover the structure itself. Most owners want the electronics and instruments below the T-top protected, with the cover stopping at the frame. We cut to the height and footprint of the console below it, with specific clearance at each corner for the leg positions.
Pontoon Console Covers
Pontoon consoles sit forward on the deck. Their profile differs from fishing-boat helms — wider, lower, sometimes built into a seating pod. Universal covers are designed around fishing-boat geometry and rarely match a pontoon footprint. A pontoon console cover is cut to the actual width and height of your console — no excess fabric, no compromise on the profile.
What Happens to an Uncovered Center Console?
A boat stored with an uncovered helm loses value measurably faster than one that's covered. Here's what that looks like in practice:
Electronics Corrosion
UV Damage
Salt Corrosion
Mould & Mildew
Pest Nesting
Surface Staining
Before After
How Is This Center Console Boat Cover Different?
-
01
Cut to Your Console's Exact Dimensions
Width at the helm. Depth from bow to stern face. Height to the top of the cowling or windscreen. We cut to your exact measurements — not a size category your console approximately fits.
-
02
100% Waterproof — Built for Marine Conditions
NylonSafe® (a premium waterproof fabric for home and light commercial use) and PVCArmour® (a heavy-duty fabric for high-exposure environments), with HydroLok® sealed seams — each seam stitched and sealed internally so water can't enter the seam lines. UV-stabilised throughout, rated for salt air and year-round marina exposure.
-
03
Stays in Position at the Dock
A hem cut to your console's exact perimeter leaves no excess fabric for marina wind to catch. Integrated drawstrings lock it at the base. No bagging, no gaps, no shifting when the boat moves at its mooring — it stays put in exposed berths without weighting or retrieval from the water.
-
04
Made Once. Protects for Years.
Reinforced at every stress point, a center console boat cover built to your exact dimensions doesn't need replacing each season. The construction handles sustained UV, salt spray, marina conditions and years of outdoor exposure without degrading.
Every cover starts from your measurements and a design we send you to approve before anything is cut. See our center console boat cover case study — a customer whose console had a ten-centimetre error the diagrams caught before production.
When Do You Need a Custom Center Console Boat Cover?
Not everyone needs this. Here is how to tell which side you are on.
This cover is right for you if:
Your boat lives outdoors — at a marina berth, on a trailer in the driveway, or moored on a river or estuary. The console is exposed to the elements between trips.
You have a T-top, custom rigging, or a universal cover that's lifted, bagged, or left gaps at the base — and you want one that actually fits.
You have marine electronics on the helm that you want protected from salt, UV, and moisture between uses.
You don't need this if:
Your boat is stored indoors and the console is never exposed to weather.
You replace a cheap universal cover every season and are happy with that arrangement.
You need something shipped today and fit doesn't matter.
Measuring Guide
How to Measure
Your cover is made to your exact measurements, so getting them right is the most important part. Our free design service converts your numbers into a scaled design you approve — before a single stitch.
And if the fit isn't right? We remake it free. That's the First Time Fit Guarantee. Need a hand? Ask an expert →
Fabrics & Tie-Downs
Fabrics
Learn why our fabrics outperform standard covers for durability and waterproofness.
Tie-Downs & Fasteners
Superior fastenings designs to keep your cover in place through stormy conditions.
What's included?
Built-In Features
Learn what makes Kuvr.co Covers unique to the market.
Free Design Service
Enter your measurements and request your free design. No catch, no obligation.
Our Promise To You
First Time Fit Guarantee
Your cover will fit first time or we'll remake it free of charge.
Warranty
Long-term cover protection with clear, defined terms.
Further Information
- Choosing a selection results in a full page refresh.
